SDS2MS DRO Two Axis Digital Reading Display Commonly Used For Precision Metal Processing

SDS2MS DRO Two Axis Digital Reading Display Commonly Used For Precision Metal Processing

Two axis SDS 2MS digital DRO and KA grating ruler, with the following characteristics:

1.Dual axis DRO: With the support of this kit, you can simultaneously monitor and control the movement of the machine tool along two axes, such as the X and Y axes in a milling machine. This allows you to analyze the working condition of the equipment very clearly.

2.Magnetic ruler encoder system: In order to produce accurate and consistent readings, the KA linear ruler encoder system utilizes magnetic technology. The DRO display unit and the magnetic balance installed on the machine shaft are used to monitor the progress of work and provide position feedback at any time, reflecting the position of the equipment in a timely manner.

3.Wide voltage range: Between 100V and 240V AC, the SDS 2MS DRO kit can work best within a wide voltage range. Its ability to regulate voltage ensures interoperability with different power supply standards. The appropriate voltage ensures that the equipment can function properly

4.Easy to use interface: The interface of the DRO display unit is easy to use and usually consists of buttons and a digital display screen. You can save time by switching between different measurement values through the feature button.

Capabilities possessed:

1. Radius/diameter conversion.

2. MM/Inch conversion.

3. Absolute/relative conversion.

4. Mid-splitting function.

5. Easy "R" function.

6. Smooth "R" function.

7. PCD hole positioning on circumference.

8. 200 groups zero position memory.

Detailed parameters of DRO SDS2MS digital readout system:

1. Voltage range: AC 85 v ~ 250 v / 50 hz ~ 60 hz

2. 15w power consumption: 25 va

3. Coordinate the number: a coordinates, two coordinates

4. Show that signed seven display (two or three axis) output data information using eight meters words show symbols

5. Net Weight: 1.3kg/2.9lb

6. The input signal: TTL, EIA - 422 open collector output signal, convenient interface with a programmable controller.

7. Allow the input signal frequency: > 100 KHZ

8. To connect a resolution: 10 microns, 5 microns, 2 microns, 1 mu m, 0.5 microns

Product image /photos:

​

The rack in the picture is optioned, not standard product.

Digital Reading Display SDS2MS DRO

Precision Metal Processing SDS2MS DRO

Two Axis SDS2MS DRO

SDS2MS DRO Two Axis Digital Reading Display Commonly Used For Precision Metal Processing Images